NAD Electronics C 399 HybridDigital DAC Integrated

Enjoy sonic excellence with the C 399 HybridDigital DAC Integrated Amplifier with MDC2 BluOS-D Card from NAD Electonics With its HybridDigital nCore output stage and high-resolution ESS Sabre DAC - the C 399 can reproduce all your digital and analog sources with a level of excitement and refinement that is unprecedented for an NAD Classic Series integrated amplifier Equipped with stereo RCA - optical - digital coax - USB-A - and HDMI eARC inputs - you can connect practically any audio device to enjoy clear and accurate sound reproduction For vinyl enthusiasts - the C 399 features a MM phono stage with ultraprecise RIAA equalization - extremely low noise - and high overload margins With the BluOS-D MDC2 module pre-installed - the C 399 is equipped with one of the most advanced and user-friendly wireless streaming eco systems currently available The C 399 is built on NAD's history of high-quality amplification and ready for the future

Features: Dual Subwoofer Outs, Stereo RCA Pre Outs, 2.2 Channel Amplifier Configuration, Dirac Live Room Correction, 180 Watts RMS per Channel into 8/4 Ohms, BluOS for Streaming and Multiroom Audio, Airplay 2 and Two-Way aptX HD Bluetooth, Siri, Alexa & Google Assistant Support, 2 Optical, 2 Coax, HDMI eARC, 2 RCA Line In, MM Phono In, USB-A for Music Playback

Amplifier Type: Integrated Amplifier (Preamp/Power Amp Combo)

Channels: 2.2

Amplifier Class: Class-D

Power Output per Channel: 2-Channel Driven:180 W at 8 Ohms / 20 Hz to 20 kHz / 0.02% THD (RMS) 180 W at 4 Ohms / 20 Hz to 20 kHz / 0.02% THD (RMS)

Dynamic Power per Channel: 217 W at 8 Ohms400 W at 4 Ohms506 W at 2 Ohms

Frequency Response: 20 Hz to 20 kHz ±0.3 dB

THD: < 0.02% (4 Ohms - 8 Ohms - Full Power)

Channel Separation: > 90 dB (1 kHz)> 75 dB (10 kHz)

Speaker Impedance: 2 to 8 Ohms

Damping Factor: > 150 (8 Ohms)

Dolby Compatibility: Dolby Atmos

Auro 3D Support: No

Supported File Formats: AAC - AIFF - ALAC - FLAC - MP3 - MQA - OGG - WAV - WMA - WMA-L via USB/Network/Optical TOSLINK/Digital Coaxial

Supported Sample Rates: Up to 192 kHz / 24-Bit

DAC: 384 kHz / 32-Bit (ESS Sabre)

Rear A/V Inputs: 1x HDMI2x Optical TOSLINK2x Digital Coaxial1x Stereo RCA (Phono MM) with Ground Screw2x Stereo RCA1x USB-A

Rear A/V Outputs: 1x Stereo RCA Pre-Out2x RCA Subwoofer Line-Out

Front I/O: 1x 1/4-inch / 6.35 mm Headphone Output

Other Rear I/O: 2x Bluetooth Coaxial F-Type Input1x Wi-Fi Coaxial F-Type Input1x USB-C (Service) Input1x RJ45 (Ethernet) Input1x USB-A (Service) Input/Output1x DE-9 (RS-232C) Output1x 1/8-inch / 3.5 mm (IR) Input1x 1/8-inch / 3.5 mm (IR) Output1x 1/8-inch / 3.5 m

Speaker I/O: 4x Binding Post Pair

HDCP Support: Yes

Audio Return Channel (ARC): ARC

HDMI CEC: Yes

Media Card Slot: No

A/B Speaker Selection: Yes

Bi-Amp Capability: No

Input Impedance: Line: 56 Kilohms

Input Sensitivity: Line: 65 mVPhono: 1.08 mV

Max Input Level: Line: > 4.6 VrmsPhono: > 80 mVrms (1 kHz)

Signal to Noise Ratio: Line: > 106 dB (A-Weighted / IHF-A)Phono: > 84 dB (A-Weighted)

Total Harmonic Distortion (THD): Line to Speaker Out: < 0.02%Headphone: < 0.005%Phono: < 0.01%

Wi-Fi: Wi-Fi 5 (802.11ac)

Bluetooth: Yes

Supported Audio Codecs: aptX - aptX HD

Wireless Audio Protocols: AirPlay 2

DLNA Support: No

External Control Support: Control4 - Crestron Command - ELAN - RTI - URC

Virtual Assistant: Apple AirPlay - Works with Alexa - Works with Google Assistant - Siri

Mobile App Compatible: Yes: Android & iOSApp Name: BluOS ControllerFunctionality: Access Stored Files - Adjust Settings - Firmware Update - Remote Control - Setup

Input Power: 100 to 240 VAC - 50 / 60 Hz

Power Consumption: Network Standby: 0.6 W

Dimensions (W x H x D): 17.1 x 4.7 x 15.4-inch / 43.5 x 12.0 x 39.0 cm (including Protrusions - with Feet)

Weight: 22.3 lb / 10.1 kg