LulzBot HS Hardened Steel Tool Head

Produce high-strength parts that retain their stability in harsh environments with the LulzBot HS Hardened Steel Tool HeadWith a hardened steel nozzle and extruder hobb - this extruder head is capable of printing high-strength composite polymers with PEEK tensile strength (15 -200 psi) The nozzle has a 08 mm diameter and a heater block that has the ability to perform in higher operating temperatures up to 248 degreesF (120 degreesC) The extruder has extrusion rates of up to approximately 181 grams per hour Your 3D prints can have a layer resolution of 400-600 microns The extruder supports several materials - such as carbon fiber-filled nylon - ABS - PETG - PLA - and NinjaFlex TPU It is recommended that you use 285 mm (3 mm) filamentThis extruder head is fully compatible with the LulzBot Mini 2 3D printer You can also use the extruder head with the LulzBot Mini 1 and TAZ 5 or 6 3D printers with the Mini 1 and TAZ 5/6 Universal Tool Head Adapters - respectively

Features: LulzBot Mini 2 3D Printer Compatible, Hardened Steel Nozzle Material, 400 - 600 Micron Layer Resolution, 0.8mm Nozzle Diameter

Compatibility: LulzBot Mini 2 3D Printer

Layer Resolution: 400 - 600 micron / 0.4 - 0.6 mm

Nozzle Diameter: 800 micron / 0.8 mm

Nozzle Material: Hardened Steel

Hot End Temperature Range: 248 - 554 degreesF / 120 - 290 degreesC

Recommended Filament Diameter: 2.85 mm (3 mm)

Supported Material: Carbon Fiber-Filled Nylon ABS PETG PLA NinjaFlex TPU

Power: 24 Volts

Fans: 1 x 5V 40 mm Heat Sink Cooling Fan 1 x 360 degrees Print Cooling Fan